So after several weeks, the big day finally arrived, time to take the engine and gearbox out of the car. … More
Category: Removal
Day 99 – Nearly…
So nearly 100 days into the strip down and some real progress. Nearly ready to remove the engine and gearbox. … More
Engine and Gearbox Removal from an MGB
A good YouTube video with some useful tips if you need to take the engine / gearbox out of your … More
Engine Lifting Kit
This is the equipment that i bought to take the MGB engine and gearbox out. 1 ton folding crane 500kg … More
Oil pump priming after strip down
I read that after a total engine strip down and rebuild it is wise to take plugs out and turn … More
Engine Back In Car
Glad to get engine back in car – jobs a lot easier using the leveller. The objective is to ensure … More
Engine Lifting Support Bar
Theoretically you can lift the engine and gearbox on the (centrally located) rocker cover stud on it’s own!…….and certainly when … More
Gearbox Lower Mounting on an MGB
These mountings were definitely ready for replacement – think someone may have attempted it in the past but unless off … More
Tip – Refitting MGB Overdrive
The Haynes manual simply says to refit as removal which is absolutely useless. It is a right swine to refit … More
MGB Gearbox drive flange removal
A pretty straight forward job if you have a piece of angle iron drilled to suit the bolts in the … More
Tip – MGB cross member mod
One of the tricky jobs in removing the engine with gearbox was removing the cross member. Apart from the fact … More
My MGB Gearbox out and cleaned up
Keen to find out why the gear stick is so sloppy got the gearbox split from the engine, cleaned up … More
Tip – Engine Out! Load Leveller
The engine had to come out to get to some jobs that need sorting (see later posts). It would normally … More