Originally posted on MGB tips mods and maintenance:
Ron Hopkinson Rear Anti-roll Bar I have been aware of the mounting brackets to the rear…
Category: Handling
Ron Hopkinson #MGB Suspension Kits
There are several alternative suspension kits available for the MGB. The first on the scene was the Ron Hopkinson kit, … More
Replacement Antiroll bar rubbers
Before I could fit the Ron Hopkinson rear anti Roll bars i needed to find some new rubbers. Took me … More
Relocating Bump Stops on MGB Lowered Suspension
A previous owner lowered the suspension on my MGB when he converted it to chrome bumpers ….. but he didn’t … More
Suspension Tuning – Understeer / Oversteer
Modifications to the suspension will normally affect the handling characteristics. These terms are recognizable as follows: Understeer:- The vehicle will … More
Measuring Camber Angle
Following on from a previous post (https://mgbtips.wordpress.com/2019/11/19/negative-camber-good-or-bad/) about the benefits of a small Camber Angle i decided i would measure … More
Negative Camber – Good or bad?
Lowering the MGB with standard lowering kits automatically gives a small negative camber on the front suspension. Rear suspension lowering … More
Lowering MGB suspension – don’t forget bump stops and axle strap mods
When lowering the front suspension the bump stops will remain in the same position! This means that if you hit … More
Ron Hopkinson Rear Anti-roll Bar
Ron Hopkinson Rear Anti-roll Bar I have been aware of the mounting brackets to the rear of the car for … More
